研究领域或方向
主要研究湍流和传热相关问题的数值解法。博士期间主要从事于超音速火焰喷涂（HVOF）过程中纳米颗粒形成和生长的建模，开发了用于捕获溶液前驱体SP-HVOFS过程的流动动力学计算模型，使用CFD技术对HVOF喷枪内部合成纳米颗粒的前驱体液滴碎裂和蒸发进行了建模。
工作经历
2012年4月至今：NED工程技术大学卡拉奇机械工程系助理教授（卡拉奇）
2009年1月至2012年3月：NED工程技术大学机械工程系讲师（卡拉奇）
科研项目Research projects
2019-壳管式热交换器的设计和CFD分析
2019-太阳能空气加热器的设计和CFD分析
2018-使用氧化铝-水纳米流体撞击射流传热的数值研究
2017-方程式敞篷赛车产生下压力的CFD分析
2017-平板太阳能集热器传热的CFD分析
2017-办公楼采暖通风和空调（HVAC）的CFD分析
2016-超音速喷嘴的CFD分析
2013-2016-热喷涂工艺CFD建模（博士）

学术成果
1- AllauddinU., M. Mahrukh U., Rehman N. U., Haque M. E., Uddin N. Numerical Investigation of Heat Transfer by an Impinging Jet using Alumina-water Nanofluid。Numerical Heat Transfer Applications 74(8)，1486-1502, 2018。DOI:10.1080/10407782.2018.1538293。(Journal Impact factor (IF) =1.953)
2- Mahrukh, M., Kumar，A.,Nabavi, S. A., Gu, S., and Sher, I.Numerical analysis of the effects of usingeffervescent atomization on solution precursor thermal spraying process。Ind. Eng. Chem. Res., 2017 56，14231-14244. DOI: 10.1021/acs.iecr.7b01864。(Journal Impact factor (IF) =3.141)
3- Mahrukh, M., Kumar, A., and Gu, S. Experimental study of the effects of using different precursor
concentrations, solvent types, and injection types on solution precursor high-velocity oxygen fuel (HVOF)nanostructured coating formation. Ind. Eng. Chem. Res., 2017, 56 (17), 4957–4969. DOI:
10.1021/acs.iecr.6b04857. (Journal IF =3.141)
4- Mahrukh, M., Kumar, A., Gu, S., and Kamnis, S. Computational development of a novel aerosol synthesistechnique for production of dense and nanostructured zirconia coating, Ind. Eng. Chem. Res., 2016, 55 (28),7679–7695. DOI: 10.1021/acs.iecr.6b01725. (Journal IF =2.843)
5- Mahrukh, M., Kumar, A., and Gu, S. Effects of angular injection, and effervescent atomization on high-velocitysuspension flame spray process, Surface and Coatings Technology, 2016, 302, 368–382. DOI:10.1016/j.surfcoat.2016.06.028. (Journal IF =2.923)
6- Mahrukh, M., Kumar, A., Gu, S., Gozali, E., and Kamnis, S. Modelling the effects of the concentration of solidnanoparticles in liquid feedstock injection on High-Velocity Suspension Flame Spray process, Ind. Eng. Chem.Res., 2016, 55 (9), 2556–2573. DOI: 10.1021/acs.iecr.5b03956. (Journal IF =2.843)
7- Gozali, E., Mahrukh, M., Gu, S., and Kamnis, S. Numerical investigation on the effects of nanoparticles onliquid feedstock behavior in High-Velocity Oxygen Fuel (HVOF) suspension spraying, Surface and CoatingsTechnology, 2015, 280, 370–377. DOI: 10.1016/j.surfcoat.2015.09.012. (Journal IF =2.923)
8- Gozali, E., Mahrukh, M., Gu, S., and Kamnis, S. Numerical analysis of multicomponent suspension droplets inHigh-Velocity Flame Spray process, Journal of Thermal Spray Technology, 2014, 23, 940-949. DOI:10.1007/s11666-014-0106-1. (Journal IF =1.344)
会议文章：
1- Mahrukh M., and Allauddin U. Experimental and numerical study of the liquid fed-high-velocity oxygen fuelspraying process. Proceedings of SIMEC-2017, March 2017, Pakistan.
2- Mahrukh M., Ilai S., Sai G. Numerical analysis of an effervescent atomization in solution precursor thermalspraying process. ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems,September 2016, United Kingdom.
3- Zaidi, M., Uddin, N., and Adeel, A. Numerical Simulations of Hydrokinetic Turbine for Power Generation.Published in the “Proceedings of International Conference on Energy and Sustainability”, 2013, Pakistan. DOI:10.13140/RG.2.1.3714.6484.
研究领域或方向
主要研究湍流和传热相关问题的数值解法。博士期间主要从事于超音速火焰喷涂（HVOF）过程中纳米颗粒形成和生长的建模，开发了用于捕获溶液前驱体SP-HVOFS过程的流动动力学计算模型，使用CFD技术对HVOF喷枪内部合成纳米颗粒的前驱体液滴碎裂和蒸发进行了建模。
工作经历
2012年4月至今：NED工程技术大学卡拉奇机械工程系助理教授（卡拉奇）
2009年1月至2012年3月：NED工程技术大学机械工程系讲师（卡拉奇）
科研项目Research projects
2019-壳管式热交换器的设计和CFD分析
2019-太阳能空气加热器的设计和CFD分析
2018-使用氧化铝-水纳米流体撞击射流传热的数值研究
2017-方程式敞篷赛车产生下压力的CFD分析
2017-平板太阳能集热器传热的CFD分析
2017-办公楼采暖通风和空调（HVAC）的CFD分析
2016-超音速喷嘴的CFD分析
2013-2016-热喷涂工艺CFD建模（博士）

学术成果
1- AllauddinU., M. Mahrukh U., Rehman N. U., Haque M. E., Uddin N. Numerical Investigation of Heat Transfer by an Impinging Jet using Alumina-water Nanofluid。Numerical Heat Transfer Applications 74(8)，1486-1502, 2018。DOI:10.1080/10407782.2018.1538293。(Journal Impact factor (IF) =1.953)
2- Mahrukh, M., Kumar，A.,Nabavi, S. A., Gu, S., and Sher, I.Numerical analysis of the effects of usingeffervescent atomization on solution precursor thermal spraying process。Ind. Eng. Chem. Res., 2017 56，14231-14244. DOI: 10.1021/acs.iecr.7b01864。(Journal Impact factor (IF) =3.141)
3- Mahrukh, M., Kumar, A., and Gu, S. Experimental study of the effects of using different precursor
concentrations, solvent types, and injection types on solution precursor high-velocity oxygen fuel (HVOF)nanostructured coating formation. Ind. Eng. Chem. Res., 2017, 56 (17), 4957–4969. DOI:
10.1021/acs.iecr.6b04857. (Journal IF =3.141)
4- Mahrukh, M., Kumar, A., Gu, S., and Kamnis, S. Computational development of a novel aerosol synthesistechnique for production of dense and nanostructured zirconia coating, Ind. Eng. Chem. Res., 2016, 55 (28),7679–7695. DOI: 10.1021/acs.iecr.6b01725. (Journal IF =2.843)
5- Mahrukh, M., Kumar, A., and Gu, S. Effects of angular injection, and effervescent atomization on high-velocitysuspension flame spray process, Surface and Coatings Technology, 2016, 302, 368–382. DOI:10.1016/j.surfcoat.2016.06.028. (Journal IF =2.923)
6- Mahrukh, M., Kumar, A., Gu, S., Gozali, E., and Kamnis, S. Modelling the effects of the concentration of solidnanoparticles in liquid feedstock injection on High-Velocity Suspension Flame Spray process, Ind. Eng. Chem.Res., 2016, 55 (9), 2556–2573. DOI: 10.1021/acs.iecr.5b03956. (Journal IF =2.843)
7- Gozali, E., Mahrukh, M., Gu, S., and Kamnis, S. Numerical investigation on the effects of nanoparticles onliquid feedstock behavior in High-Velocity Oxygen Fuel (HVOF) suspension spraying, Surface and CoatingsTechnology, 2015, 280, 370–377. DOI: 10.1016/j.surfcoat.2015.09.012. (Journal IF =2.923)
8- Gozali, E., Mahrukh, M., Gu, S., and Kamnis, S. Numerical analysis of multicomponent suspension droplets inHigh-Velocity Flame Spray process, Journal of Thermal Spray Technology, 2014, 23, 940-949. DOI:10.1007/s11666-014-0106-1. (Journal IF =1.344)
会议文章：
1- Mahrukh M., and Allauddin U. Experimental and numerical study of the liquid fed-high-velocity oxygen fuelspraying process. Proceedings of SIMEC-2017, March 2017, Pakistan.
2- Mahrukh M., Ilai S., Sai G. Numerical analysis of an effervescent atomization in solution precursor thermalspraying process. ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems,September 2016, United Kingdom.
3- Zaidi, M., Uddin, N., and Adeel, A. Numerical Simulations of Hydrokinetic Turbine for Power Generation.Published in the “Proceedings of International Conference on Energy and Sustainability”, 2013, Pakistan. DOI:10.13140/RG.2.1.3714.6484.