一、研究领域或方向
主要针对Al, Mg等结构金属材料开展研究,当前的研究兴趣包括:
塑性加工工艺设计及合金强韧化机理
晶体塑性、力学各向异性及织构调控
多场耦合条件下的塑性变形与再结晶机制
二、教育背景
2015.03 - 2016.05 俄亥俄州立大学,材料科学与工程系,联合培养博士
2011.09 - 2017.07 清华大学,yh86银河国际,工学博士
2007.09 - 2011.07 中南大学,yh86银河国际,工学学士
三、工作经历
2015/03-2016/05 博士联合培养,俄亥俄州立大学
2021.08 - 至今 我校,yh86银河国际强度研究室,副教授
2017.08 - 2021.07 我校,yh86银河国际强度研究室,讲师
四、科研项目
镁合金电致塑性轧制织构优化的合金化效应研究,国家自然科学青年基金项目51801147,2019.1~2021.12,33.6万,主持;
薄带连铸轻合金的强韧化与服役性能,国家自然科学基金重大项目51790482,2018.1~2022.12,300万,参与
锆合金形变各向异性行为与组织结构调控机理研究,中国核动力研究设计院,2020.1~2021.12,24万,参与
铝合金导体材料样品制备及微观组织分析, 全球能源互联网研究员有限公司,2020.6~2021.4,37万,参与
五、代表性论文
[1] J. Kuang*, X. Zhao, Y. Zhang, J. Zhang*, G. Liu*, J. Sun, G. Xu, Z. Wang. Impact of thermal exposure on the microstructure and mechanical properties of a twin-roll cast Al-Mn-Fe-Si strip, Journal of Materials Science & Technology, 107 (2022) 83-96.
[2] J. Kuang*, Y. Zhang, X. Du, J. Zhang*, G. Liu*, J. Sun. On the Strengthening and Slip Activity of Mg-3Al-1Zn alloy with Pre-induced {10-12} twins, Journal of Magnesium and Alloys, in press.
[3] C. Zhang, X. Bao, D. Zhang, W. Chen, J. Zhang*, J. Kuang*, G. Liu, J. Sun. Achieving superior strength-ductility balance in a novel heterostructured strong metastable β-Ti alloy, International Journal of Plasticity, 147 (2021) 103126.
[4] D. Zhang, J. Zhang*, J. Kuang*, G. Liu*, J. Sun. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications, Acta Materialia, 220 (2021) 117288.
[5] J. Kuang*, X. Du, T. Al-Samman, X. Li, G. Liu*, J. Sun. On the texture weakening during electropulse annealing treatment of Mg-1Ce alloy: The role of nucleation and nucleus growth, Metallurgical and Materials Transactions A, 12 (2020) 6640-6657.
[6] X. Zhao, J. Kuang*, K. Shi, P. Zhang, H. Xue, J. Zhang*, G. Liu*, J. Sun, G. Xu, Z. Wang. Heterogeneous microstructure-mediated ductile fracture of twin-roll cast Al–Mn strip, Materials Science and Engineering: A 783 (2020) 199222-199231.
[7] J. Kuang, T.S.E. Low, S.R. Niezgoda, X. Li, Y. Geng, A.A. Luo*, G. Tang*. Abnormal texture development in magnesium alloy Mg–3Al–1Zn during large strain electroplastic rolling: Effect of pulsed electric current, International Journal of Plasticity 87 (2016) 86-99
[8] J. Kuang, X. Li, R. Zhang, Y. Ye, A.A. Luo*, G. Tang*. Enhanced rollability of Mg 3Al 1Zn alloy by pulsed electric current: a comparative study, Materials & Design 100 (2016) 204-216.
[9] J. Kuang, X. Du, X. Li, Y. Yang, A.A. Luo*, G. Tang*. Athermal influence of pulsed electric current on the twinning behavior of Mg–3Al–1Zn alloy during rolling, Scripta Materialia 114 (2016) 151-155.
[10] J. Kuang, X. Li, X. Ye, J. Tang, H. Liu, J. Wang, G. Tang*. Microstructure and texture evolution of magnesium alloys during electropulse treatment, Metallurgical and Materials Transactions A 46 (2015) 1789-1804.